Remington 29663 700 5-R Military Specs .308 Winchester 24 Inch Stainless Barrel
Remington 29663 700 5-R Military Specs .308 Winchester 24 Inch Stainless Barrel
Not appearing on the Remington website is one of their best kept secrets, the Remington 700 5-R Mil Spec. The Remington 700 5-R Mil Spec features a Remington M700 stainless steel barreled action with a 24 inch R5 mil-spec barrel, the same barrel used in the Remington Defense M-24 sniper rifles. Barrel features a 11.25 inch twist rate with five lands and grooves and eleven degree target crown. Stock has aluminum bedding in block in standard VS configuration.
“Offering this Model 700 for ten years is a testimony to the popularity and acceptance by shooters wanting to own an exceptionally accurate rifle at a reasonable price,” states Category Manager, Dave Regula. At the core of the 700 with 5-R Rifling is the machined stainless steel, cylindrical Model 700 receiver design ensuring uniformity, strength and solid bedding area. Unique to this precision rifle is the 24-inch stainless steel, heavy barrel featuring 5-R Tactical Rifling — the same hammer-forged barrel used on the Remington M-24 sniper rifles.
Remington 700 5-R MilSpec
The 5-R Rifling barrel features five lands with a right hand twist which allows for less bearing surface on the bullet for slightly increased velocity.
As a result of less bullet drag, copper fouling in the bore is reduced ensuring long-term accuracy and consistency. The barrel is offered with a 110 target-style crown and a 1 in 11.25-inch twist.
The rock-solid barreled action is full-length, aluminum bedded into a well-designed H-S Precision stock for enhanced stability and shot-to-shot consistency. Add Remington’s X-Mark Pro® externally adjustable trigger, designed to “break-like-glass” and set at 3.5 pounds from the factory, and this rifle delivers surgical-like accuracy.
Remington 700 5-R Mil Spec Specifications
Mfg Item Number: 29663
Category: FIREARMS – RIFLES
Action :Bolt Action
Caliber : .308 Winchester
Barrel Length :24
Twist: 11.25″ Trigger :Single Stage
Stock : Green H&S Stock with Black Webbing
Finish :Stainless Steel
MDT TAC21 Rifle
REMINGTON M2010 ENHANCED SNIPER RIFLE | REMINGTON MILITARY SNIPER RIFLE
Remington M2010 Enhanced Sniper Rifle
Remington M2010 Enhanced Sniper Rifle (Formerly XM2010)
The Remington M2010 Enhanced Sniper Rifle (ESR), formerly known as the XM2010 and M24 Reconfigured Sniper Weapon System, is a modular sniper rifle developed by PEO Soldier for the United States Army. It is derived from the M24 Sniper Weapon System and replaced the existing M24s.
After winning a competitive bidding process, Remington was awarded the production contract for up to 3,600 weapons. The Army had anticipated fielding upgraded weapons to deployed U.S. Army Snipers near the end of December 2010, but later expected fielding would happen in January 2011.
The M2010 system differs from the prior M24 Sniper Weapon System in that it fires .300 Winchester Magnum ammunition to provide approximately 50 percent additional effective range relative to the M24’s 7.62×51mm NATO.
This chambering to dimensionally larger cartridges is possible because the M24 Sniper Weapon System was designed to use the “long action” bolt version of the Remington 700 receiver for cartridges up to 3.34 inches (84.84 mm) in overall length.
The U.S. Army developed the system so that the additional effective range would help snipers in engagements in mountainous and desert terrain in which the War in Afghanistan was being fought. The general penalties for using bigger, more powerful magnum rifle ammunition compared to smaller, standard rifle cartridges are increases in recoil, jump, flash, weight, and barrel wear.
Remington M2010 Enhanced Sniper Rifle Design
The REMINGTON M2010 ENHANCED SNIPER RIFLE differs from 7.62×51mm NATO chambered M24 Sniper Weapon System in that M2010 sniper weapons are:
- Chambered to .300 Winchester Magnum.
- Barreled to a 24 in (610 mm) long, 1 in 10 inch (254 mm) twist rate (using Obermeyer 5-R rifling) hammer-forged free floating barrel.
- Fitted with a new chassis (stock) assembly that maximizes the amount of physical adjustments for the sniper to provide a better user customized fit. The chassis has a right folding buttstock that shortens the system for easier transport and better concealment during movement and accommodates the mounting of accessories via removable Mil Std 1913 Picatinny Rails and accessory cables via routing channels.
- Fitted with a five-round detachable box magazine.
- Fitted with a quick-attachable/detachable Advanced Armament Corporation sound suppressor with muzzle brake to reduce recoil and jump and audible and visible signature with an available thermal sleeve that reduces mirage effect on heated suppressors. The 10 in (254 mm) Titan-QD Fast-Attach suppressor eliminates 98 percent of muzzle flash, 60 percent of recoil, and reduces sound by 32 decibels.
- Fitted with a Leupold Mark 4 6.5–20×50mm ER/T M5A2 Front Focal variable power telescopic sight featuring a 34 mm tube diameter, first focal plane Horus Vision H-58 grid system range estimation reticle and Bullet Drop Compensation,fielded with the AN/PVS-29 or AN/PVS-30 Clip-on Sniper Night Sight.
- The application of advanced corrosion resistant coatings throughout the system.
According to Remington Arms each rifle is tested to meet (and typically exceeds) the requirement to fire ≤ 1 MOA/0.28 mrad (less than a 2-inch shot group at 200 yards) before being released for fielding.
Remington M2010 Enhanced Sniper Rifle Ammunition
In 2009 the U.S. government purchased MK 248 MOD 1 .300 Winchester Magnum match-grade ammunition for use in .300 Winchester Magnum sniper rifles like the U.S. Navy Mk13 SWS or reconfigured M24 SWSs. This ammunition was developed as a .300 Winchester Magnum Match Product Improvement (PIP) and uses the 14.26 g (220 gr) Sierra MatchKing Hollow Point Boat Tail (HPBT) very-low-drag bullet fired at a nominal muzzle velocity of 869 m/s (2,850 ft/s) ± 15.2 m/s (50 ft/s).
According to the U.S. Navy this ammunition should increase the maximum effective range of .300 Winchester Magnum sniper rifle systems to 1,370 m (1,500 yd), decrease wind deflection on bullets in flight and use a reduced muzzle flash propellant that remains temperature stable across an operational temperature range of -32 °C to 74 °C (-25 °F to 165 °F).According to JBM Ballistics, using the G7 ballistic coefficient provided by Bryan Litz, and a Weapon Employment Zone (WEZ) analysis of the XM2010 rifle with various .300 Winchester Magnum ammunition types by Bryan Litz, the MK 248 MOD 1 .300 Winchester Magnum cartridge, when fired at its nominal muzzle velocity of 869 m/s (2,850 ft/s), should have 1,286 to 1,289 m (1,406 to 1,410 yd) supersonic range under International Standard Atmosphere conditions at sea level (air density ρ = 1.225 kg/m3).
In January 2014, the U.S. Department of Defense annual testing report found that the older A191 or MK 248 Mod 0 .300 Winchester Magnum service round loaded with aerodynamically less efficient 190 gr (12.32 g) Sierra MatchKing Hollow Point Boat Tail (HPBT) bullets fired from the XM2010 demonstrated adequate performance and lethality. Live fire tests were conducted in March 2013 against ballistics gelatin, light material barriers, and other targets to determine the projectile’s ability to perforate targets. This was the first time the Pentagon’s Director, Operational Test and Evaluation (DOT&E) tested the round, which can hit targets out to 1,200 m (1,312 yd).
Remington M2010 Enhanced Sniper Rifle History
The U.S. Army issued three XM2010s to snipers at the United States Army Sniper School on 18 January 2011 and began using the rifle in combat in Afghanistan in March 2011. The XM2010’s .300 Win Mag round extends the engagement range over the M24 from 800 meters to 1,200 meters, enhancing lethality and standoff. The Barrett M107 .50 caliber rifle can hit targets past 2,000 meters, but it is accurate to 2.5 MOA, meaning it would hit within a 25 in (640 mm) area at 1,000 meters. This was acceptable for material targets, but not individual personnel. The XM2010 addressed the problem and gave increased range over the M24 but maintained 1 MOA accuracy. Remington had been awarded a $28 million on 20 September 2010 to rebuild 3,600 M24 rifles, but only 250 had been ordered to be changed by the time the first XM2010s were fielded.
Due to the success of the XM2010, Army officials considered a “pure fleet,” meaning all 2,500 Army M24s would be upgraded to XM2010 standard. Snipers in the field learned how to transition to the XM2010 and learn its use, maintenance, and capabilities during a three-day course. After the course, snipers had no difficulty hitting targets out to 1,000 meters from “ridgetop to ridgetop.” In addition to the more powerful cartridge, the new optic enhances the rifle’s ability to sight a target quickly without needing to do calculations of range estimation. All 250 XM2010 rifles were to be fielded in 8 Brigade Combat Teams by mid-May 2011.
Based on the results and feedback from troops, the U.S. Army decided in May 2011 to replace its entire fleet of M24s, ordering a total of 2,558 M2010 rifles. By September 2012, the Army had fielded more than 1,400 systems as part of an urgent material release. The M2010 achieved Type Classification-Standard in July 2013 and Full Materiel Release in September 2013, supporting procurement for the balance of the Army requirement. On 25 April 2014, the 2,558th M2010 rifle was completed.
Precision Guided Firearm Testing
In March 2014, the company TrackingPoint revealed their smart scope was being integrated onto the M2010 sniper rifle. The Army purchased six systems in January 2014 for testing and the networked scope and guided trigger had been added to the platform. The TrackingPoint system includes a computerized scope that marks a selected target, gathers and compensates for external factors, and uses a special trigger that does not pull until the system is sure the bullet will land where intended. TrackingPoint costs between $22,000 and $27,000 to be installed on a bolt-action rifle to achieve hits out to 1,250 yd (1,143 m), though it is not intended to replace sniping skills but be used by soldiers who need to take shots at longer sniping ranges.
REMINGTON 700 XCR TACTICAL LONG RANGE | 84462
Remington 700 Owners Manual Rev 5-10
The renowned Remington 700 rifle has been the platform of choice for military and law-enforcement snipers for years, and now you have a chance to enjoy the same kind of outstanding long-range shooting performance with the Remington 700 XCR Tactical Long Range Rifle. Chambered in the hard-hitting, long-range .300 Winchester Magnum Caliber.
Remington 700 XCR Tactical Long Range 84462
Never before has a rifle this durable and rugged been introduced to the world of hunting. Featuring Remington’s superb proprietary TriNyte™ Corrosion Control System, the Model 700™ XCR™ (Xtreme Conditions Rifle) is virtually impervious to even the most extreme conditions.
Remington 700 XCR Tactical Long Range Rifles—the perfect solution for long-range precision shooters. A long-time favorite of both the military and tactical police units, the Remington 700 XCR Tactical Long Range delivers the legendary accuracy and unfailing performance you’ve come to expect.
Remington 700 XCR Tactical Long Range features a X-Mark Pro externally adjustable trigger and 416 stainless steel barreled action with Black TriNyte® PVD coating, providing a diamond-hard layer of defense against the elements.
Its new tactical Bell & Carlson stock comes in OD green with black webbing and features a full-length aluminum bedding block, tactical beaver-tail fore-end and a recessed thumb-hook feature for optimum “off-the-bench” shooting performance. The barrel features wide tactical-style fluting for rapid cooling.
REMINGTON 700 XCR TACTICAL LONG RANGE SPECIFICATIONS
- Model – Remington Model 700 XCR Long Range Tactical Bolt Action Rifle
- Caliber – .300 Winchester Magnum
- Barrel – 26″ Free-Float, 1:10″ Twist
- Tactical Barrel Fluting
- Magazine – 3 Round hinged Floorplate
- Trigger Guard Safety
- Remington 40x Externally Adjustable Trigger
- Bell & Carlson Tactical Stock
- OD green with black webbing finish
- Full length aluminum bedding block
- Tactical Beavertail Forend
- Recessed thumb hook
- 416 stainless steel barrel with black Trinyte coating
- Dual front swivel studs & rear swivel stud
- Drilled & tapped
- Total Overall Length – 43-3/4″
- Length of pull – 13-3/8″
- Drop at Comb – 1-1/4″
- Drop at Heel – 1-1/2″
- Weight – 8-1/2 lbs.
REMINGTON 700 XCR TACTICAL LONG RANGE | 84462
REMINGTON 700 USR URBAN SNIPER RIFLE
REMINGTON 700 USR URBAN SNIPER RIFLE
REMINGTON 700 USR URBAN SNIPER RIFLE is designed for the modern day operator who needs advanced capabilities to perform his mission. The USR™ is the pinnacle of REMINGTON 700 tactical rifle development. It begins with the superb R700™ LTR,™ then adds essential tactical components such as a detachable box magazine, MARS rail, variable power optics, adjustable stock, muzzle brake, optional sound suppressor and bipod.
Caliber – .308 / 7.62x51mm
Receiver – Remington 700 Short Action
Barrel – 20”, Cold Hammer Forged, 1:12 Twist
Suppressor – AAC 762-SD, 51-Tooth
Trigger – Xmark Pro, 3.5 – 5lbs
Stocks – HS Precision, Composite construction, Aluminum mounting block, Adjustable LOP and Cheek
Magazine – 10 round detachable
Bipod – Harris LM-S
Optics – Leupold Mark 4 M3 LR/T, 3.5-10X, Bullet Drop Compensator
Rings – Badger Ordnance, Steel
Optics Base – Modular Accessory Rail, Side rails
Weight – Base Rifle – 9lbs, Complete – 12.66 lbs
Length – W/o suppressor -40.5”, w/suppressor – 47.5”
Variations – Complete system, Rifle only
Accessories – Hard case, Deployment kit
REMINGTON 700 BARREL | REMINGTON 700 AFTERMARKET BARREL
Christensen Arms Carbon Remington 700 Barrel
The Remington 700 Barrel -These days Remington does a fine job manufacturing accurate rifles. However there may come a time when the old Remington 700 is not shooting groups as tight as it once did or maybe you just want the best accuracy that can be achieved from your rifle. A replacement barrel is a good investment. Its like getting a new and more accurate gun at half the price.
All barrels for a Remington model 700 will be required to be fitted to some degree by a gunsmith. If you choose a barrel such as the Shilen it requires the least amount of work as it is pre threaded with a cut chamber. This means it only needs reamed to the final dimension. Other barrels are purchased as blanks and must be cut to length, threaded and have the chambers cut and reamed for your desired caliber. In many cases the barrel will require some sort of coloring or protective coating as many barrels are sold “in the white”.
Note: There are no drop in barrels for a Remington 700. All replacement barrels must be fitted and headspaced by a qualified gunsmith
Note: Replace your factory Remington 700 Trigger before you consider a new barrel. Visit the Remington 700 Trigger page for further information.
Christensen Arms Remington 700 Barrels
Christensen Arms offers a REMINGTON 700 CARBON WRAPPED BARREL. It’s their only entry in the crowded Remington 700 Barrel field.
Christensen Arms Carbon Remington 700 Barrel
Designed using precision engineering adopted from the aerospace industry, Christensen Arms carbon-fiber barrels are crafted using a proprietary layered design that offers any marksman superior accuracy and performance. The barrel lining is made from match-grade 416R stainless steel and is measured to a tolerance of +/- .0001. When it comes to accuracy, Christensen Arms carbon-fiber barrels have performance you can trust. The Original Carbon Fiber Remington 700 barrel is available for your favorite rifle. Simply select the barrel version for your application. Following your online order, a CA representative will contact you for all necessary specs and/or arrange for shipping logistics to send your rifle to our facility.
Criterion Remington 700 Barrels
Criterion Barrels produces 308AR barrels for OEMs like American Defense and the Fulton Armory Titan series of tack driver rifles. We are big supporters of Criterion Barrels.
Criterion Barrels Remington 700 Barrel
Criterion manufactured Savage pre-fit barrels are available through Northland Shooters Supply (NSS). These barrels can be modified to fit Remington rifles using the NSS exclusive Rem/Age barrel nut. We offer finished lengths up to 30″ and five contour options: Sporter, Heavy Sporter, Light Varmint, Varmint, Bull. Many caliber and contour combinations are in stock at NSS. Contact Jim Briggs at Northland Shooters Supply, (763) 682-4296, for availability and order information
Shilen Remington 700 Barrels
Range time, competition wins and online reviews speak volumes. Shilen Barrels are among a small group of elite barrel manufacturers that can be considered the best of the best.
Shilen Remington 700 Barrel
Shilen Select Match Grade Remington 700 Barrel – These stainless steel masterpieces of machining and hand lapping are intended for the competition shooter– or even the hunter– who wants the ultimate in accuracy and quality. These are our highest grade barrel and, of course, the most costly. What makes them so good that benchrest shooters, such as Tony Boyer, crave them? Consider this: To meet Select Match Grade criteria, the groove diameter must air gauge within .0003″ of our standard diameter. Moreover, the uniformity of the bore cannot vary more than .0001″ for the entire length of the barrel. These barrels are also completely stress relieved, and the bore is polished to a gleaming surface finish by our most experienced lappers.
Shilen Match Grade Remington 700 Barrel
Our Match Grade barrels don’t quite meet Select Match criteria– but not by much! In these barrels, the bore must measure within .0005″ of our standard diameter and cannot vary in diameter more than .0003″ for the length of the barrel. So how much accuracy does a couple of “tenths” give away, compared to our Select Match barrels? Perhaps not any! The point is, whether or not there is any real difference in the accuracy potential between the Match and Select Match grades, the really demanding shooter must play it safe and go with the higher grade. In many cartridges and barrel twists, the accuracy difference between the two simply can’t be detected. So unless you’re gunning for one-hole groups or just demand the top of the line, the Match Grade barrel is your best choice for many forms of competitive shooting and for hunting varmints and big game. The Match Grade is completely stress relieved and fully warranted. The price of Match Grade stainless steel barrels includes hand lapping to a beautifully smooth surface. Chrome-moly can be lapped to a similar finish at an additional charge. Both are available in all calibers, twists and contours.
Shilen Remington 700 barrels are pre-threaded short-chambered and crowned. Barrel exteriors are polished to a 180-grit finish, and the bores have been hand lapped. Requires installation and finish chambering by a qualified gunsmith.
Materials:Shilen barrels available in Chrome Moly Steel or Stainless Steel
- Match Grade:
- Button Rifled
- Stress Relieved
- Bore diameter within .0005″ of standardWork Needed:
- Requires finish chambering and headspacing to action
- Requires external polishing and application of the finish of your choiceContours:
- These barrels are made to the same contours as factory Remington 700 barrels.
Lilja Remington 700 Barrels
Lilja Remington 700 Barrels
Lilja barrels have also been used by all the major bullet manufacturing companies, and by the ammunition industry for accuracy and pressure testing of their products.
Lilja barrels are made from rifle barrel quality, 416-type stainless and 4140-type chrome-moly steels manufactured in the U.S. In addition, all of our tooling is either made in our shop or by U.S. suppliers. The barrels are pull-button rifled, with a very uniform twist rate. Every barrel is stress-relieved in a vacuum furnace, handlapped, and inspected with a video bore scope. Quality is also assured through the use of our Sheffield Air Gauge System and Rockwell Hardness Tester. Stainless steel barrels are guaranteed to be uniform dimensionally to .0001″ and free from internal tool marks. Chrome-moly barrels are uniform to within .0002″ end to end. We do not have different grades of barrels in the two types of steel: just one, our best match quality.
Bergara Remington 700 Barrels
Bergara Remington 700 Barrels
Bergara is proud to be the first barrel manufacturer to offer premium replacement barrels for Remington Model 700 rifles utilizing the same barrel nut system found on Savage bolt-action rifles.
Every barrel is precision chambered to SAMMI specifications and fully threaded in either a blued or matte stainless steel finish. This system makes Bergara Barrels the fastest installation on the market for Remington Model 700. All that is required for conversion is a vice, a strap wrench and a set of chamber gauges. Note: Selected caliber must match existing bolt face diameter. Barrel diameters follow factory contours as close as possible but some minor stock inletting may be required. BC0033 Remington Model.308 Winchester 24 inch Sporter 4140 Chrome Moly Blued 1:12 inch Righthand Twist
Pac-Nor Remington 700 Barrels
“Standard Match Remington 700 Barrel”: Our Standard-Match barrels are supplied in both stainless and chrome-moly steel. These barrels are made using conventional rifling button designs and are available in many twist rates and land/groove configurations. Standard-Match barrels are carefully hand-lapped for excellent bore uniformity and surface finish. These barrels are capable of excellent accuracy potential and are recommended for most hunting and varmint shooting applications. Standard-Match barrels are available as blanks, contoured barrels, and prefit contoured barrels.
“Super-Match Remington 700 Barrel”: The PAC-NOR Super-Match barrel is our premium grade rifle barrel. These barrels can be supplied in stainless or chrome-moly steel. Super-Match barrels are made using a proprietary rifling button design which yields barrels that have an extremely uniform rate of twist for the ultimate in accuracy potential. Super-Match barrels are designed with a unique land/groove geometry which ensures a good bullet gas seal with minimal bullet distortion. This special land/groove configuration also substantially reduces metal fouling in the barrel when the barrel is properly broken-in. All Super-Match barrels are carefully hand-lapped to a fine lustre finish and exhibit the exceptional dimensional uniformity required for the high level of accuracy possible using this product. Super-Match high performance barrels are recommended whenever the ultimate in accuracy is required. These barrels are supplied as blanks, contoured blanks, and prefit contoured barrels.
Krieger Remington 700 Barrels
Krieger Remington Model 700 Barrel
Krieger Barrels has been making premium rifle barrels for over 30 years. All of our barrels are manufactured using single-point cut-rifling and each and every barrel we make is thoroughly inspected and held to the same premium match grade standards, whether its an ammunition test barrel, a custom bolt action barrel or a ready-to-install finish chambered AR15.Bolt ActionFrom 20 caliber to 4 bore Krieger Barrels makes fully custom bolt gun blanks. Whether you are looking for a replacement barrel or putting together a custom rifle, Krieger Barrels will make the barrel you need. Choose from our catalog or specify your contour, caliber and twist rate. In some cases you can even specify the number of grooves, groove width and custom bore and groove dimensions. Fluting, muzzle threads, fitting and many other services are available.
All of our barrels are single-point cut-rifled and thoroughly inspected to produce satisfaction guaranteed match-grade rifle barrels every time. Order online or give us a call at (262) 628 – 8558 to place your order today!
Broughton Remington 700 Rifle Barrels
Broughton Rifle Barrels / North Manufacturing Co., Inc. is dedicated to crafting one of the Premier Stainless Steel Rifle Barrels in the U.S.A utilizing the 5C ® process. For any serious shooter, be it a Hunter or Target Shooter, having a rifle built with quality components is a must. If you want to build a rifle with a premier target quality barrel that will give the shooter the edge they need to shoot that trophy mount or shoot a small group, then you want a Broughton 5C® Rifle Barrel.
Broughton 5C® Rifle Barrels are crafted from the finest material made today, 416R Stainless Steel. They are pulled button-rifled, Double stressed relieved at the mill & triple stress relieved in our shop at Broughton 5C® Rifle Barrels. Then each barrel is hand lapped with a uniform land and groove diameter up to 0.0001″ from breech to muzzle. Our muzzle is NEVER larger than our breech.
We offer a variety of land and groove combinations for most twist in calibers 22RF to .375 with 5C ® rifling, but conventional rifling is available. We are continually adding new selections to meet the demands of new bullets and cartridges. Please give us a call at (920) 922-4882 for specific combinations.
Since 2003 we have introduced 22RF, .224, .243, .264, 270, .284, .308, .338, and .375 caliber “5C ®” (canted land) barrels. These barrels are showing exceptional clean ability, more velocity, longer barrel life, reduced bolt / breech pressure and extreme accuracy – shooting small groups at short and long ranges. We will expand this 5C ® land formation into other calibers and twist options in the future or when used to meet your needs.
Each barrel is crafted with the highest of quality standards. If a barrel doesn’t meet our quality standards, it does not go out the door. From start to finish we track what is being done and the results to each barrel by serial number. An individual tracking record is kept with your file for every barrel. If a customer has a question or concern about their specific barrel or would like a barrel similar as another customer, we can look it up and duplicate or continually improve the process. Our craftsman takes pride in every barrel we ship.
It is our commitment to you to craft the finest rifle barrel your money can buy. Give us a call at (920) 922-4882 to discuss your next barrel purchase. Quality, Accuracy & Customer Satisfaction is #1. We guarantee it!
ER SHAW Remington 700 Barrels
You’ll find E. R. Shaw gun barrels all over the world – utilized by some of the biggest firearms manufacturers as well as individuals who want only the best. E. R. Shaw engineers only Premier Grade barrels made by skilled craftsmen with years of barrel-making experience and utilizing the latest technology and metals. When you need a gun barrel, precision engineered to very exacting specifications, you need E. R. Shaw. Our years of research and hands on experience combine to provide you with a fine finished product.
Fluted Remington 700 Barrels At E. R. Shaw Custom Barrels we offer three types of rifle barrel fluting for you to choose from – Traditional Straight Fluting, Shaw’s Patented Helical Fluting (U.S. Patent DES. 426,611) or Shaw’s Patented Functional Helical Fluting (U.S. Patent USG. 324,780B1). The unique appearance of our Helical Fluting (U.S. Patent DES. 426,611) provides the discriminating shooter with a barrel that looks great. Shaw’s Patented Functional Helical Fluting (U.S. Patent USG. 324,780B1) is thirty percent more rigid than a similar barrel with Straight Fluting; provides improved barrel harmonics; helps to counteract rotational torque, giving the shooter greater shot consistency; and increases the barrel surface area.
Finishes and Bluing Services – Our premium-grade bluing is second to none. We use an exclusive blue-black process which results in a rich, deep luster. For those wishing that added custom touch, we offer a bead-blast matte finish which is glare-free and lends an understated elegance to any rifle, especially those stocked in the classic style. Our bead-blast matte finish is also available on our 416 Stainless Steel barrel. Please note that our action bluing services are available only on rifle barreled actions that we have installed on one of our barrels.
McGowen Precision Barrels
Formed in 2007, McGowen Precision Barrels builds on a proud tradition of custom barrel manufacturing. McGowen Precision Barrels was started with the purchase of Harry McGowen’s “mothballed” machinery. The manufacturing process has been updated to 21st Century techniques. Using state of the art equipment, and finely honed manufacturing techniques, McGowen Precision Barrels aims to make the highest quality barrels on the market. The manufacturing process continues to undergo changes and improvements in the pursuit of perfection. The McGowen Precision Barrels name is making an impact in the industry, not only in hunting rifles, but are now becoming a favorite of long range competition shooters.
Cut Rifling Barrels
We are in the process of perfecting the age old tradition of cut rifling. We are still a few months out from producing barrels for sale. We are working on cut barrels with the highest degree of accuracy manufactured with 21st Century digital perfection.
McGowen Precision Barrels will continue to upgrade our machinery and our capabilities. One upgrade in our capabilities is the addition of cut rifled barrels. As of February 27th, 2014 we are still working on the cut-rifling machine. We do not have an anticipated date in which these will be available. Please note that calibers will be limited at first as we bring the machines online. We’re also working hand-in-hand with our sister company McGowen Gun Works to manufacture custom rifle actions. We are currently working on the final design on our patented Mini action. We’re working hard to have this available before the end of 2013. Keep watching here and our sister companies website americangunco.com for more information.