Archangel Springfield Armory M1A Precision Stock

Picture of a Archangel Springfield Armory M1A Precision Stock Desert Tan Polymer

Archangel Springfield Armory M1A Precision Stock

The Archangel© AAM1A Precision Stock for the Springfield Armory© M1A™ and M14 rifles* provides all the advanced features, ergonomics, and snug fit required to make your rifle more accurate and feel great too. The inlet design applies gentle pressure to the barreled action to reduce group size. This next generation stock incorporates click adjustable cheek with a 1.75” travel and length of pull adjustments of 13.50″ to 14.8125″ and a contoured, textured, soft rubber recoil pad.

Visit Promag

Archangel Springfield Armory M1A Precision Stock

For sling accommodation, four integral steel inserts are embedded for QD type sling swivels (QD swivels not included), and is also equipped with two standard UM style sling swivel studs. The grooved, textured forend has an integrated Picatinny rail with extended rail cover. The ergonomic gooseneck style grip has ergonomic palm swells and a flared base with a locking storage compartment. Constructed of our legendary high strength, carbon fiber and glass reinforced tan polymer, the AAM1A is impervious to weather and will withstand all standard gun solvents and oils. This stock is tough as nails and will deliver outstanding accuracy shot after shot, year after year. *Will also fit Norinco, Polytech, Armscor, and other M14 variants with minor fitting. Springfield Armory© M1A™Supermatch™ rifles require a pocket cutout for the additional rear recoil lug. Lifetime Warranty. Made in USA

Description

  • Fits the Springfield Armory© M1A™ and M14 rifles*
  • Cheek riser is thumbwheel click adjustable in .05″ increments with 1.75″ of travel
  • Length of pull is thumbwheel click adjustable from 13.50″ to 14.8125″
  • Incorporates four (4) integral steel inserts for ball lock / push button quick detach sling swivels (sling swivels not included)
  • Constructed of our legendary high strength, carbon fiber and glass reinforced tan polymer
  • Equipped with two (2) standard UM sling swivel studs
  • Precision fit inlet provides excellent accuracy
  • Forend Picatinny rail with extended rail cover
  • Locking grip storage compartment
  • Overall Length: 33.625″
  • Weight: 4.2 pounds
  • Lifetime Warranty**
  • Made in USA

*Will also fit Norinco, Polytech, Armscor, and other M14 variants with minor fitting. Springfield Armory© M1A™ Supermatch™ rifles require a pocket cutout for the additional rear recoil lug

  • Black (AAM1A)
  • Desert Tan (AAM1A-DT)
  • Olive Drab (AAM1A-OD)

Save

Save

VLTOR M1-S M14 M1A IMPROVED MODSTOCK SYSTEM

Picture of VLTOR M1-S M14 M1A IMPROVED MODSTOCK SYSTEM

VLTOR M1-S M14 M1A IMPROVED MODSTOCK SYSTEM

While the original VLTOR M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, VLTOR saw huge areas of improvement. The stock system is now formed with VLTOR’s proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before. The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25″ higher for use with mounted optics. This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine. The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

DOWNLOAD: VLTOR M1-S M14 M1A IMPROVED MODSTOCK SYSTEM USERS MANUAL

VLTOR M1-S M14 M1A IMPROVED MODSTOCK SYSTEM

The VLTOR Improved Modstock chassis is made to military specifications. There is a large amount of variation in the commercial SAI receivers, including variation in the height of the rear heel in the receivers. It is possible that you may experience a minor heel gap with your commercial receiver. The proper way to fix this heel gap is to build up the back of the stock by way of bedding. For this reason, VLTOR offers a “raw” version of their Improved Modstock chassis that is uncoated and features a bare carbon composite surface. If you plan on bedding the chassis for accuracy purposes, or to guarantee a lack of heel gap, you may consider purchasing the “raw” variation of the chassis to expedite the bedding preparation process. After bedding the stock, you may coat the stock portion of the chassis in a coating of your choosing. **Please note** Any bedding or modification of the chassis will void your factory warranty. For additional information please email TechSupport@Vltor.com

The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock. *The VLTOR CASV-14 handguard system and Vltor ModPod bipod set are sold separately* https://www.vltor.com/shop/featured/casv-14-m14-rail-system/

Features

  • Lightweight
  • Drop-in installation
  • Proprietary mold and carbon fiber composite specific to VLTOR
  • Stock adjusts for 1.25″ in elevation
  • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
  • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
  • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
  • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
  • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
  • Matte (anti-reflection/anti-glare) finish
  • Has standard military and quick disconnect swivel socket accessible from both sides
  • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)

Specifications

  • Weight of stock system: 2lbs 13oz
  • LOP fully collapsed: 11.50 inches
  • LOP fully extended: 14.75 inches
  • Buttpad angle: -5 degrees with decrease to -15 at toe

Save

Save

Delta 14 Chassis Gen 2 with Folding Stock FS3

Picture of a Delta 14 Chassis Gen 2 with Folding Stock FS3 M1A M14 Stock

Delta 14 Chassis Gen 2 with Folding Stock FS3

This is the Delta 14 Chassis constructed of glass filled nylon. Mounting of the stock is simple with the 5/16X18 fastener that will mate in any Mossberg 500 stock onto the chassis system. Installation of the chassis with the rifle does not require any tools. Simply pull the trigger guard from old rifle and remove the barrel and action. Drop into the Delta 14 Chassis and reinstall the trigger group.

One Chassis and a multitude of options.

Whether you are looking for a pistol grip or Monte Carlo, you can interchange at will with the same platform.  Installing the rifle is the same as the factory stock and does not require tools. One Chassis and a multitude of options.

Delta 14 Chassis Gen 2 with Folding Stock FS3 Description

This is the Delta 14 Chassis constructed of glass filled nylon. Mounting of the stock is simple with the 5/16X18 fastener that will mate in any Mossberg 500 stock onto the chassis system. Installation of the chassis with the rifle does not require any tools. Simply pull the trigger guard from old rifle and remove the barrel and action. Drop into the Delta 14 Chassis and reinstall the trigger group.

One Chassis and a multitude of options.

Whether you are looking for a pistol grip or Monte Carlo, you can interchange at will with the same platform.  Installing the rifle is the same as the factory stock and does not require tools. One Chassis and a multitude of options.

Components are individually packaged, assembly required.

Advantages:

  1. Light weight
  2. Paintable
  3. Does not translate hot and cold as aluminum systems
  4. Installation to rifle requires no tools
  5. Guaranteed for life, No questions asked
  6. ALL AMERICAN MADE, from Design, tooling, Production, and Materials
  7. M-Lok mounting system

Specs:

  1. .75 LBS (Just Chassis)
  2. 3,6,9 o’clock M-Lok rail system for mounting of accessories
  3. Steel front Ferrule
  4. Steel t-nut mounting for stocks

Parts Included:  D14C G2 FS3

  1. Delta 14 Chassis with Steel Ferrule Gen 2
  2. (1) UTG Aluminum M-Lok Rail (Color Black)
  3. BCM Rail covers
  4. Mesa Tactical adaptor (including hardware for mounting to Delta 14 Chassis) Color Black
  5. UTG folding assembly (Color Black)
    1. Castle nut (Color Black)
  6. Pistol grip (Color Black)
  7. 6 position buffer tube (Color Black)
  8. UTG S3 stock (Color Black)

Delta 14 Chassis Gen 2 with Folding Stock FS3 Installation Instructions

Installation Instructions of the Stock to the Chassis

Delta 14 Chassis Gen 2 with Folding Stock FS3 Installation Instructions

  1. Select the Delta 14 Chassis GEN 2
  2. Select the stock from the many that are available for the Mossberg 500
  3. Using an Allen wrench, fasten the bolt into the back of the chassis receiver 5/16X18 UNC hole provided in the chassis.
    1. Note this is a steel t-nut molded in the stock so be cautious not to cross thread the bolt. Damage to the threads might disable chassis performance.
    2. Minor fitting of the stock to the chassis might be necessary due to differences in stock manufacturing practices.

Installation and Removal of the Action is the Same as the Factory Stock

Advantages

  1. Compound angle of the stock to the chassis allows the operator to use the iron sights as well as optics
  2. Hand to trigger position very close
    1. Look at the competitors hand how far away the pistol grip is from the trigger guard
  3. Injection molded Nylon
    1. Service Temperature range -20C to 120C
    2. Excellent resistance to chemicals
  • Not affected by UV
  1. Accessory rail system “M-LOK” allows operator to mount only what they desire on any of the 3 sides accommodating the rail system (3, 6, 9 positions)
  2. Lighter than machined aluminum stock/chassis systems.
    1. .75 Lbs. is the Chassis weight
  3. Assembly and disassembly of the action do not require tools
  4. No impediment to the action.
  5. Mossberg 500 are plentiful
  6. Full Textured surface for easy handling
  7. Front internal drain hole
  8. Less cost that other stocks in the same class

Save

Save

Sage M14ALCS M14 EBR Stock Enhanced Battle Rifle Stock

Picture of Sage M14ALCS M14 EBR Stock Enhanced Battle Rifle Stock

Sage M14ALCS M14 EBR Stock Enhanced Battle Rifle Stock

In 1999 the United States Navy SEALs, Naval Surface Warfare, Crane Division, approached Sage International, Ltd. for assistance in
modernizing the M14 rifle.  The 7.62x51mm NATO cartridge coupled with the M14’s reliable and robust design made the rifle superbly suited for long range target engagement.

 As part of the Arctic Rifle Program the M14 in its existing wood and synthetic stocked configuration was not well suited to be easily deployed in confined spaces and harsh environments. This prompted the SEALs to began searching for a more compact M14 for arctic warfare.

 After field evaluations the NAVY SEALs reported they liked the Sage aluminum chassis mod the best. Through a combined effort of Crane and Sage, the M14 Enhanced Battle Rifle aka “M14 EBR” was born. 

To date Sage International, Ltd. has supplied over 15,000 combined M14 and M1A1 EBR Chassis Stock Systems to the United States Armed Forces and commercial markets.


Sage M14ALCS Enhanced Battle Rifle Chassis Stock System

The Sage M14ALCS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.

SPECS: Overall Length Collapsed- 27.5”. Overall Length Extended- 33.5”. Weight- 5.1 LBS. Finish- Mil-Spec Hard anodize. 

Watch the video

Save

Save