M14 Stocks and Chassis

M14 Stocks and Chassis

by | Dec 23, 2018

  1. Home
  2. M14 Stocks and Chassis

M1A and M14 Stocks and Chassis

There was a day when M1A/M14 stocks came in one material wood. In those days the options were quality and types of wood, today it’s a different world. Today’s M14, M1A shooters are seeking the modularity of the AR-15. This modularity is coming by way of stocks and chassis that accept AR-15 stocks, pistol grips and rail mounted accessories. On the other end of the spectrum is simple synthetic stocks with various finishes. 

Archangel Springfield Armory M1A Precision Stock

The Archangel© AAM1A Precision Stock for the Springfield Armory© M1A™ and M14 rifles* provides all the advanced features, ergonomics, and snug fit required to make your rifle more accurate and feel great too. The inlet design applies gentle pressure to the barreled action to reduce group size. This next generation stock incorporates click adjustable cheek with a 1.75” travel and length of pull adjustments of 13.50″ to 14.8125″ and a contoured, textured, soft rubber recoil pad.

read more

VLTOR M1-S M14 M1A IMPROVED MODSTOCK SYSTEM

While the original VLTOR M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, VLTOR saw huge areas of improvement. The stock system is now formed with VLTOR’s proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before. The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25″ higher for use with mounted optics. This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine. The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

read more

Sage M14ALCS M14 EBR Stock Enhanced Battle Rifle Stock

The Sage M14ALCS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.

read more

Save

Save

Save

Save

Save

Save

Save

Save

Save