gtag('set', {'user_id': 'USER_ID'}); // Set the user ID using signed-in user_id.

Springfield Armory M1A Scout Squad Model

by | Dec 22, 2018 | M14 and M1A Rifle | 0 comments

  1. Home
  2. M14 and M1A Rifle
  3. Springfield Armory M1A Scout Squad Model
Picture of a Springfield Armory M1A Scout Squad Model

Springfield Armory M1A Scout Squad Model

I’m old enough to remember Jeff Cooper in the 1980’s and 1990’s passionately writing about the need for a “Scout Rifle” (Read the Definition of a Scout Rifle Farther Down). The Springfield Armory M1A Scout Squad Model Rifle is a departure from his definition in two significant ways. The Springfield Armory M1A Scout Rifle is semi-automatic, Jeff Cooper specified bolt action and the Springfield Armory M1A Scout Rifle weighs in at 8.8 pounds while Jeff Cooper specified the scout rifle weigh less than 6.5 pounds.  

With that said I think in this day and age Jeff Cooper would have embraced the Springfield Armory Scout Rifle

Springfield Armory M1A Scout Rifle

Scout Rifle as Defined By Jeff Cooper

Scout Rifle as Defined By Jeff Cooper

  1. Caliber: a standard chambering of .308 Winchester/7.62×51mm NATO or 7mm-08 Remington for locales that forbid civilian ownership of cartridges in chamberings adopted by military forces or for its “slightly better ballistics.  As Cooper wrote, “A true Scout comes in .308 or 7mm-08. The .243 Winchester is an alternative for young, small-framed, or recoil-shy people, but needs a 22” barrel. Cooper also commissioned “Lion Scout,” chambered for the .350 Remington Magnum cartridge.
  2. Action: all Cooper’s prototype scout rifles were bolt-actions, however he said “if a semiautomatic action were made which was sufficiently compact and otherwise acceptable, it should certainly be considered”. Cooper said the Brno ZKK 601 action is the closest to the guidelines. A bolt-action two-lug, 90° rotation was favored, as was the traditional Mauser claw extractor. The bolt knob should be smooth and round, not checkered and positioned far enough forward of the trigger to avoid pounding of the index finger during firing. The safety should be positive and include three positions. It should disconnect the trigger mechanism rather than blocking it. It should be strong and positive and work from front to rear, rear position “safe” and forward “fire.”
  3. Trigger: smooth and clean, and provide a crisp 3lb release.
  4. Weight: an unloaded weight, with accessories, of 3 kg (6.6 lb); with 3.5 kilograms (7.7 pounds) the maximum acceptable.
  5. Length: an overall length of 1 meter (39 inches) or less. These two characteristics place scout rifles into the general class of carbines.
  6. Optics: a forward-mounted telescopic sight of low magnification, typically 2 to 3 power. This preserves the shooter’s peripheral vision, keeps the ejection port open to allow the use of stripper clips to reload the rifle, and eliminates any chance of the scope striking one’s brow during recoil. Cooper has stated that a telescopic sight is not mandatory.
  7. Reserve sights: ghost ring auxiliary iron sights: a rear sight consisting of a receiver-mounted large-aperture thin ring, and typically a square post front sight on the receiver bridge and not on the end of the barrel, where it catches on things, breaks, snags and muddies up. This allows the rifle to be accurately aimed at short to medium ranges even if the scope becomes damaged.
  8. Stock: synthetic rather than wood stocks. Heel of the butt rounded to avoid snagging on the shirt. A spare magazine stored in the butt. A retractable bipod that does not protrude from the stock.
  9. Magazine: magazine should be so constructed as to protect the points of soft point spitzer bullets as they ride in the magazine. Some sort of magazine cutoff permitting the rifle to be used in the single-shot mode with the magazine in reserve. As an alternative to the magazine cutoff is a detachable box magazine with a double intent which could be inserted to its first stop not allowing the bolt to feed it. When desired, the magazine could be pressed into its second stop, permitting the bolt to pick up the top cartridge.
  10. Sling: a “Ching” or “CW” sling. Against common practice, Cooper advocated the use of a sling as a shooting aid. The Ching sling offers the convenience of a carrying strap and the steadiness of a target shooter’s sling with the speed of a biathlete’s sling. (The CW sling is a simpler version of a Ching sling, consisting of a single strap.)
  11. Accuracy: should be capable of shooting into 2 minutes of angle or less (4″) at 200 meters/yards (3 shot groups)

These features dictated short, thin barrels, synthetic stocks, and bolt actions. Other optional features included a retractable bipod, detachable magazines, a butt magazine, and an accessory rail for lights and other attachments. The addition of some of these features often render the rifle technically not a scout as originally defined, but this has come to be accepted by many as still conforming to the spirit if not the letter of the concept.

Springfield Armory M1A-A1 Scout Rifle

Sometimes you need something a little different. A full sized battle rifle can be a tight squeeze in your truck or in the heavy brush. The Springfield Armory® M1A-A1™ Scout Squad™ combines the legendary power and reliability of the M1A™ with the quick handling and fast sight acquisition of a scout style rifle.

From the two-stage military trigger to the aperture style rear sight (adjustable for windage and elevation), you’ll find that the Scout Squad™ is packed with all the standard features that make the M1A™ great. The barrel is shortened to 18 inches – something you’ll appreciate on those longer hikes over the mountain and through the alders. The forward position scope mount brings you the added versatility of extended eye-relief optics. The Scout Squad™ also features a specially designed muzzle brake to help tame the recoil.

Download: Springfield Armory M1A Manual

  • SKU: 5165449530
  • UPC: 706397900090
  • MFR#: AA9120
  • Caliber: .308 Win / 7.62x51mm NATO
  • Barrel: 18”
  • Twist: 1:11 RH
  • Grooves: 6
  • Barrel Material: Carbon Steel
  • Overall Length: 40.33”
  • Weight: 8.8 lbs.
  • Stock: Composite
  • Stock Finish: Flat Dark Earth
  • Front Sight: National Match 0.062” Blade
  • Rear Sight: Military Aperture 0.0690” with MOA Adjustment for Windage and Elevation
  • Trigger: 2 Stage, 5-6 lbs
  • Magazines: (1) 10 Round, Steel

Whether you’re looking to save some space on your next big hunting trip, or you need a ranch rifle that will be a constant companion, the Scout Squad™ will give you the maneuverability of a scout rifle with the same power and features of a legendary American battle rifle.