gtag('set', {'user_id': 'USER_ID'}); // Set the user ID using signed-in user_id.

FN SCAR STOCK ADAPTER | VLTOR SCAR STOCK ADAPTER

SCAR Stock Adapter VLTOR | VLTOR SCAR STOCK ADAPTER

VLTOR SCAR STOCK ADAPTER

 

This Vltor SCAR Receiver Extension Stock Adapter is a drop-in, non-folding replacement part for the standard FN SCAR 16S or 17S factory buttstock assembly. This machined aluminum FN SCAR adapter provides a rigid platform onto which any mil-spec diameter collapsible AR-15 stock may be installed. This results in an enormous amount of options from which the shooter may choose in order to personalize the rifle to his or her individual specifications.

FN SCAR STOCK ADAPTER | VLTOR SCAR STOCK ADAPTER

The Vltor SCAR stock adapter features 6 different length of pull positions. The Stock adapter can be adjusted up and down to alter comb height for use with different sighting arrangements. Unlike the OEM stock it replaces, the VLTOR SCAR adapter incorporates a generous, o-ring sealed storage compartment inside the hollow extension tube with room to carry batteries, cleaning supplies and/or small spare parts.

For shooters who don’t use or feel the need for the side-folding capability of the factory supplied SCAR buttstock, the Vltor adapter is an excellent way to increase the gun’s modularity by outfitting it with the ability to accept many of the different AR-15 collapsible stocks on the market.

The VLTOR SCAR STOCK ADAPTER comes complete with a pair of quick detach sling swivel sockets (one on each side of the adapter block).

VLTOR SCAR Stock Adapter

VLTOR SCAR Stock Adapter

VLTOR SCAR STOCK ADAPTER INSTRUCTIONS

Installation of the VLTOR SCAR AR-15 stock adapter is simple, with no permanent alterations to the host rifle required.

Simply remove the factory FN SCAR stock and slide the aluminum Vltor adapter block into the receiver.  Next slide the male dovetail of the receiver extension tube in from the top to engage the female dovetail of the adapter block. Finally sdjust the extension tube up or down until the desired position is obtained. Use a bullet tip or other similar tool to tighten the large locking screw on the adapter’s side to secure the tube to that location.

A Mil-Spec diameter collapsible AR-15 stock may then be installed on the extension tube in the normal fashion.

NOTE: This SCAR stock adapter is the Commercial variant, and fits Semi-Auto FN SCAR 16S (Light) and 17S (Heavy) rifles ONLY. Not compatible with select fire SCAR rifles.

FN SCAR BARREL ASSEMBLY | AFTERMARKET SCAR BARREL

Today it’s no small feat to introduce a completely new weapon platform and have it succeed in a land dominated by the AR15 and to a lesser degree the AR-10 and 308AR. FN has managed to do just that with the FN SCAR platform. While the FN SCAR might not be as modular as the at aforementioned AR-15, AR-10 and 308AR the after market upgrades from FN as well as third party sources are a testament of the platforms success.  To that end FN is offering three different SCAR BARREL ASSEMBLY upgrades.

FN SCAR BARREL ASSEMBLY | AFTERMARKET SCAR BARREL

FN SCAR Barrel Assembly

FN SCAR BARREL ASSEMBLY VARIATIONS

FNH SCAR 16S 10" Barrel Assembly www.combatrifle.com

FNH SCAR 16S 10″ Barrel Assembly

Description: FNH SCAR 16S 10″ Barrel Assembly Mfr Part: 98802. The FN SCAR barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed.  Available in short lengths for reduced weight, fast handling and confined space maneuvering.  Assemblies can be easily installed by the user with a Torx T25 and 62 In Lb torque wrench and are ready to shoot without headspacing. This barrel will only fit FNH SCAR 16 rifles chambered in 5.56 NATO.   All NFA/ATF Rules Apply.  You May Not Install This Barrel Assembly On Your SCAR Rifle Unless It Is A Registered SBR

FNH SCAR 16S 14" Barrel Assembly www.combatrifle.com

FNH SCAR 16S 14″ Barrel Assembly

Description: FNH SCAR 16S 14″ Barrel Assembly Mfr Part: 98804.  The FN SCAR barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed.  Available in short lengths for reduced weight, fast handling and confined space maneuvering.  Assemblies can be easily installed by the user with a Torx T25 and 62 In Lb torque wrench and are ready to shoot without headspacing. This barrel will only fit FNH SCAR 16 rifles chambered in 5.56 NATO.   All NFA/ATF Rules Apply.  You May Not Install This Barrel Assembly On Your SCAR Rifle Unless It Is A Registered SBR

FN SCAR 17s Barrel Assemblies

FNH SCAR 17S 13" Barrel Assembly www.combatrifle.com

FNH SCAR 17S 13″ Barrel Assembly

Description: FNH SCAR 17S 13″ Barrel Assembly Mfr Part: 98814.  The FN SCAR barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed.  Available in short lengths for reduced weight, fast handling and confined space maneuvering.  Assemblies can be easily installed by the user with a Torx T25 and 62 In Lb torque wrench and are ready to shoot without headspacing. This barrel will only fit FNH SCAR 17 rifles chambered in 7.62 NATO.   All NFA/ATF Rules Apply.  You May Not Install This Barrel Assembly On Your SCAR Rifle Unless It Is A Registered SBR

 

 

The FN SCAR barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed. Available in short lengths for reduced weight, fast handling and confined space maneuvering. Assemblies can be easily installed by the user with a Torx T25 and 62 In Lb torque wrench and are ready to shoot without headspacing. ALL NFA RULES APPLY. SPECS: Material: Cold hammer-forged, chrome-lined MIL-SPEC steel.

AFTERMARKET SCAR BARREL


SCAR TRIGGER GEISSELE AUTOMATICS | AFTERMARKET SCAR TRIGGER

SCAR TRIGGER GEISSELE AUTOMATICS: The FN SCAR16s, and FN SCAR17s have become commercial successes. Commercial success is no small feat in an AR15 dominant country. One of the way’s I judge the FN SCAR platform as a commercial success is the availability of aftermarket parts beyond niche manufacturers. When you see companies like Geissele Automatics who dominate the top tier lever AR15, AR10, 308AR triggers now producing SCAR Triggers and selling them at Brownells and the other usual sources, it’s time to pay attention. Unfortunately state laws prohibit me from owning a SCAR.

SCAR TRIGGER GEISSELE AUTOMATICS | AFTERMARKET SCAR TRIGGER

Geissele Super Scar Trigger

The Super SCAR Trigger by Geissele is a two-stage, semi-auto only, drop-in replacement trigger. The Super SCAR gives a clean and crisp 4-1/2 lb total trigger pull comprised of a 2-1/2 lb first stage followed by a 2 lb second stage. All components are black oxide coated to provide outstanding corrosion protection. The trigger kit comes complete with all parts, springs, lubricants and installation instructions necessary to install in any SCAR 16s or 17s.

SPECS: The Geissele SCAR has a total pull weight of about 4.5lbs – 2.5lbs on the first stage and 2lbs on the second stage. The pull weight and sear engagement are not adjustable by the shooter.

The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and FN SCAR 17. The Geissele Super SCAR trigger is designed to only fit into the standard polymer trigger housing manufactured by FN. The SCAR trigger is a non-adjustable, two-stage trigger but it is not a Match trigger. The Geissele SCAR trigger is ideally suited for Close Quarters Battle (CQB) and mid-range work. Comes with Aeroshell #6 Lubricant.

Note: The Geissele Super Scar trigger is designed to fit into the standard FN factory polymer trigger housing ONLY.


Geissele Super Scar Trigger Installation Video

Geissele Super Scar Trigger Installation Video

Geissele Super Scar Trigger Installation Video


Geissele Super Scar Trigger Installation Instructions

Download the Geissele Super Scar Trigger Installation Instructions

Geissele Super SCAR Trigger Installation Instructions PDF Download

Geissele Super SCAR Trigger Installation Instructions PDF Download


SCAR Trigger Geissele Automatics


FN CSR-20

FN CSR™-20

FN CSR-20

The Future of Advanced Combat Precision Sniper Rifles

The FN CSR™-20, or Compact Sniper Rifle, is the future of advanced combat precision sniper rifles. Leveraging and improving upon combat-proven architecture of the FN SCAR® family of weapons, the FN CSR™-20 provides a highly reliable, accurate and modular weapon system designed for easy operator and armorer level maintenance. The FN CSR™-20 is chambered in 7.62x51mm, features a sub-MOA, 16-inch, cold hammer-forged, chrome-lined barrel, monolithic aluminum receiver, and non-folding stock with adjustable cheekpiece. *Product in development.

FN CSR™-20
PRIMARY FEATURES

Semi-automatic
Rotating, locking bolt
Composite polymer trigger moduleCapable of suppressed fire
Enhanced accuracy in a compact package

Receiver

Hard-anodized monolithic aluminum receiver
MIL-STD 1913 accessory rails at 3, 6, 9 and 12 o’clock positions

Barrel

Cold hammer-forged, chrome-lined steel
Fully free-floating design
Can be removed/replaced by the operator
Flash hider optimized for suppressed fire

Stock

Non-folding adjustable cheekpiece and length of pull
without tools
Aluminum and polymer construction

Operating Controls

Ambidextrous selector lever and magazine release
Match-grade trigger
Non-reciprocating charging handle may be mounted
on left or right side
Adjustable gas regulator for use with or without
suppressor to optimize bolt speed and functioning

Magazine

Steel body, low friction follower
Extended base pad

FN CSR™-20

CALIBER: 7.62×51 mm
MAGAZINE: 20 RD.
Operation: short-stroke gas piston
Effective Range: 800 m point target
Overall Length: 40.1″ (extended); 35.9″ (collapsed)


FN SCAR16s Picatinney Damage

FN SCAR 16s

FN SCAR 16s

May 23, 2009

FN SCAR16s Picatinney Damage – I received an email with images from my friend Jim who was completely disappointed with the condition his brand new $3000 FN SCAR 16s arrived from the factory. Apparently when FN builds the SCAR16s rifle they attach an accelerometer to the picatinny rail for the purpose of measuring and qualifying the SCAR bolt cyclic rate. It appears that on Jim’s specimen SCAR the accelerometer was not properly installed which resulted in the hard coat and anodizing being scuffed and removed to bare aluminum in several locations along the picatinny rail. This is more than a simple cosmetic issue. The anodizing and hard coat protects the aluminum from oxidation and galvanic corrosion which in turn protects the FN SCAR16s and devices that utilize the picatinny rail.

Jim was quick to get a call into FN who admitted they had heard of this issue on other SCARS but had not seen it until Jim’s images. FN agreed to rectify the situation at once.

Update: FN decided they would not resolve this for Jim. Probably were concerned with a flood of FN SCAR16s owners looking for similar treatment. In a recent informal poll online it was about a 50/50 split whether this blemish was something to be concerned with or not. Some SCAR owners feel that the rail would like like that after installing an optic mount anyhow so it was no big deal. Well I see it the same as Jim with this rifle. If I spend $3000 for any gun I expect it to be flawless from the factory. If the picatinny rail gets chewed up from an optic I install that’s different and my choice. I expect better from FN.

 

FN SCAR 16s Damage

FN SCAR 16s Damage

FN SCAR 16s Damage

FN SCAR 16s Damage

 

SCAR Armorers Tools
TangoDown has made some tools available for working on the FN SCAR.

  • SCAR Armorer’s Block Set
  • SCAR Upper Receiver/Barrel Vise Block
  • SCAR Lower Receiver/Trigger Module Vise
  • SCAR Bolt Maintenance Block
TangoDown FN SCAR Armorers Tools

TangoDown FN SCAR Armorers Tools

FN SCAR16s Picatinney Damage