gtag('set', {'user_id': 'USER_ID'}); // Set the user ID using signed-in user_id.

KRG FOX-42 Precision Rifle | MAGPUL MASSOUD

KRG FOX-42 Precision Rifle | MAGPUL MASSOUD

 KRG FOX-42 SEMI AUTOMATIC RIFLE

 KRG FOX-42 Precision Rifle Formerly Known as the Magpul Massoud

The designer of the prototype 7.62x51mm rifle companion to the 5.56mm Masada – called “Massoud” – has kept his idea for a semi-automatic 7.62mm rifle alive in Kinetic Research Group’s prototype FOX-42 precision rifle. The Massoud was not simply an enlarged Magpul Masada, despite its outward similarities. It differed in using a four-lug bolt and a hybrid direct impingement/tappet method of operation. The new KRG FOX-42, in turn, is not simply a re-branded Massoud; the tappet gas system has been dropped in favor of a fixed piston fed from a direct impingement style tube, akin to the gas system on the Tavor.

KRG’s product designers have worked long and hard to hone their skills. Years ago, their initial design was a stable, spigot mounted bipod for bolt action rifles. This was followed by a rotating M4 scope mount that allowed use of either a precision optic or a red dot style optic depending on the situation. These products never saw the light of mass production but served an important purpose for the company.

KRG FOX-42 Precision Rifle | MAGPUL MASSOUD

Magpul Remington 700 Hunter 700 Stock

MAGPUL REMINGTON 700 HUNTER 700 STOCK

MAGPUL REMINGTON 700 HUNTER 700 STOCK

MAGPUL REMINGTON 700 HUNTER 700 STOCK – Made from reinforced polymer and an anodized aluminum bedding block, the MAGPUL REMINGTON 700 HUNTER 700 STOCK offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user*. This stock is also M-LOK compatible to accept a broad range of accessories. Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting. Made in U.S.A.

MAGPUL REMINGTON 700 HUNTER 700 STOCK

MAGPUL REMINGTON 700 HUNTER 700 STOCK

MAGPUL REMINGTON 700 HUNTER 700 STOCK FEATURES

  • Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates*
  • Easily upgradeable to removable AICS-spec magazines (5.56×45 or 7.62×51 pattern) with the affordable Magpul Bolt Action Magazine Well
  • Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block
  • Accepts ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920″ dia. 5.50″ forward of the breech)
  • Tapered Beam design provides good rigidity through forend and will free-float compatible barrels
  • 60 degree grip angle from bore axis
  • Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
  • Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
  • Optional High Cheek Riser Kit with 0.50″ and 0.75″ Risers to adjust cheek weld (Stock comes pre-fitted with 0.25″ Riser)
  • Accepts factory and most aftermarket triggers
  • M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
  • Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
  • Push-button QD swivel compatibility in rear with optional Sling Mount Kits
  • Left and Right rear 1-1/4” Footman’s Loops

 

MAGPUL REMINGTON 700 HUNTER 700 STOCK SPECIFICATIONS

  • Weight: 3.0 lbs without action and bottom metal (w/two Spacers installed)
  • LOP Adjustment Range: ~13.0-15.0 in.
  • Width of Forend, max: 2.3 in.
  • Width of Butt, max: 1.5 in.
  • Butt-Pad Dimensions: 1.5×5.0 in.

 

*NOTE: Fits right-hand recievers only.

All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well. Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700.

MAGPUL REMINGTON 700 HUNTER 700 STOCK


Magpul Massoud, Semi Automatic Assault Rifle, 7.62/308

Picture of a Magpul Massoud

Magpul Massoud

Magpul Massoud History

Based on the Magpul Masada, the Magpul Massoud was being developed as ground up approach to the .308 (7.62×51) battle rifle!

A canceled prototype, the Magpul Massoud was a 7.62mm caliber semi-automatic rifle with the possibility of other calibers (.300WM, .338 Calibers). A prototype was test fired, and strongly resembles the Magpul Masada. It may use of some of the same parts as the ACR, including stocks and possibly forearms. Details of the operating system are closely guarded, however it is believed to be a short stroke gas piston operation, and use 7.62×51mm NATO 20-round variants of the Magpul PMag. It uses a Mil-std 1913 rail system with monolithic receiver. The name was chosen in honor of Ahmad Shah Massoud, the famous resistance leader of the Afghani Northern Alliance who was killed two days prior to the 9/11 attacks.A new prototype rifle based on the Massoud, the FOX-42 from Kinetic Research Group is in development.

Magpul Massoud Videos

MAGPUL MASSOUD

Imagine a young former US Marine, an end user, who designed a rubber-like gadget to help get a magazine out of its pouch and into his rifle faster, named his fledgling company after it and a few years later introduced a new rifle that shocked the industry. Hard to believe? Maybe, but that man was Richard Fitzpatrick and the name of the gadget and his company is Magpul.

Several years ago, Rich Fitzpatrick, showed me a prototype of a rifle he called the Masada, a weapon named after the great standoff made by the Jews thousands of years ago, the ultimate act of defiance. When Magpul unveiled the Masada “Adaptive Combat Rifle” rifle during 2007, all eyes were on it. Combining the most modern production methods with well-proven operating principles, this rifle seemed to combine the best of all worlds, but Fitzpatrick didn’t design it by himself. Putting together a brilliant team of Mike Mayberry, Eric and Brian Nakyama and Drake Clark, Fitzpatrick gives credit where it’s due.

Using a conventional short stroke gas piston to operate its rotating bolt group was just the beginning of this revolutionary rifle. The Masada was full of surprises and they were all good news for law enforcement, gun collectors and maybe even the US Military.

Between his Magpul and the Masada, Fitzpatrick had designed and produced a series of revolutionary buttstocks for the AR-15 platform, and a brand new patented adjustable stock was one of the hallmarks of the Masada. This straight-line, ergonomic stock complemented the modernistic silhouette of the Masada, but did not house any part of the recoil spring group, allowing the stock to fold. With lineage to the AR-18, Stoner 63 and L85, the bolt, carrier and recoil spring were all housed inside the upper receiver, which itself was unique.

Using a steel trunion, the upper receiver connected this with the right and left hardened steel (not aluminum) rails to guide the bolt, covered by an aircraft alloy housing with a full-length integral Mil-Std-1913 rail along the top. Mated to the upper receiver was a lower one made from the same reinforced, super strong polymer used in another Magpul innovation, the PMAG 30-round magazine also introduced with the rifle. The lower receiver housed a modular trigger pack and fully ambidextrous controls, all of which were comparable to those of the M16, except for its bolt hold-open/release, which operated like that of the FAL. The ambidextrous, non-reciprocating charging handle was also reminiscent of that used in the G3.

With a threaded extension, the upper receiver’s trunion accepted a barrel nut to retain the barrel extension, but the interrupted threads were large with a rapid pitch, and the nut had a folding handle and a ratchet lock. This system provided a fast and efficient quick-change barrel for the Masada. Above the barrel was a conventional AR-18 type short stroke gas piston reminiscent of those used in the 1934 Tokarev and the WWII German G43 rifles. Equipped with Mil-Std-1913 side and bottom rails, but the polymer handguard can be quickly removable by the same type pushpins used to connect the upper and lower receivers.

Only six prototype Masada rifles were made, two using different lower receivers with magazine wells to accept other calibers and magazines. In late 2007, Magpul licensed Remington/Bushmaster to fully develop and manufacture the Masada under its official and fitting name, the Adaptive Combat Rifle (ACR). With some subtle changes, the new Remington ACR should be available as you read this.

MAGPUL Massoud Details

Not ready to rest on its laurels, Rich Fitzpatrick and his design crew were, in the meantime, busy designing another rifle. This was a slightly larger version in 7.62x51mm (.308) caliber. After Rich showed me the prototype rifle during early 2008, there was a lot of testing to be done. Although this is still ongoing, Drake Clark finally gave me clearance and I’ve just driven 700 miles to get a closer look at it and two more pre-production versions.

Called the Massoud, the rifle is named after Ahmed Shah Massoud, the “Lion of the Panjshir,” the Afghani leader of the Northern Alliance who stood as the pillar in the fight against oppression. Al Qaeda assassinated him on September 9, 2001. I wondered if it was just by coincidence that I had traveled to Magpul to see the rifle that bears this name on September 9, 2009.

The new Massoud is slightly (and I mean only slightly) larger than its petite sibling and it weighs exactly the same, but is 1.5 inches longer. Although describing the Masada is to describe the latest version of the Massoud, there are several distinctive exceptions. The newest Massoud uses a unique 4-lug bolt that allows a more efficient positioning of the AR-10 type extractor. The ejector is the standard plunger type housed in the bolt face.

The second exception is the Massoud’s new 20-round polymer magazine. Designed after Magpul’s now famous PMAG, this one is essentially a 21st Century SR-25 magazine and yes, it will soon be available separately for all rifles that use this magazine.

Although the Massoud’s barrel is easily changeable, it does not use the more rapid system introduced in the Masada. Instead, after pushing out the single handguard retaining pin and removing the handguard, a special wrench is used to unscrew the castle barrel nut in order to remove the barrel and its extension (with the bolt group locked back or removed).

Piston Operated Gas System

The last exception in how the Magpul Massoud differs from the Magpul Masada and even the first Massoud prototype is its gas system. Somewhat reluctantly, but knowing he could trust me, Drake Clark and Justin J., the designer of the interesting new gas system, removed the Massoud’s handguard to show it to me. Refraining from using the one word that would describe its operation, I will tell you that Magpul describes it only as “Piston Operated.” I can also tell you that I have never seen anything like it, but that it is utterly simple with a reduction in moving parts and weight.

The new system was designed specifically to enhance accuracy and to reduce weight. Just as important, it was conceived to increase reliability by prolonging dwell time before the bolt unlocks. Until this new system is fully patent protected, it will remain a closely guarded secret.

In comparing the first prototype Massoud to the two current rifles, I noticed little difference other than the departure from the early rifle’s Masada style short stroke gas piston system and some changes in the handguard. The new gas block is user adjustable via a unique pivoting lever with four settings: Normal, dirty, suppressed and off. All barrels are Krieger stainless steel and are match grade. Of course there was also the flat dark earth color of the early gun that showed the rigors of having fired more than 10,000 rounds (it has never been cleaned). The two new guns are black, but would be offered in different colors if they were mass-produced.

One aspect of the Massoud that helped reduce weight was its use of Magpul’s ambidextrous folding backup sights. Not BUIS, the generic acronym for such sights, as these are made from the same PMAG tough polymer with steel pins, blades and apertures. Magpul has appropriately named them MBUS (pronounced em-bus). Weighing almost nothing, these sights are super fast to deploy (even quietly) and are almost as fast to replace to their folded position. Designed for easy mounting on a receiver and handguard top rails, MBUS come in black, flat dark earth and foliage green. They cost a fraction of what steel BUIS do and have become my favorite backup sights.

In addition to barrel lengths and handguards, the Massoud’s lower receiver will accept any of three Magpul buttstocks designed for it and the Remington ACR. Two of these are based on current Magpul designs with the third being the one described above. The fully adjustable PRS (sniper) buttstock was designed for the main long-range precision version of the Massoud.

Magpul Massoud Range Time

One thing that surprised me was the total ergonomics of the Massoud, as well as how petite and lightweight it seemed. With an experimental carbon fiber barrel I was shown, the standard rifle is lighter than its Masada counterpart. All controls operated smoothly and were accessed easily. Like the Masada (now the Remington ACR) the Massoud’s controls are measurably superior to their AR-15/AR-10 counterparts.

Traveling to a private range, we shot all three Massoud rifles, either for groups or informally. Quite surprisingly, the modular trigger group produced an excellent let-off reminiscent of the Sig Sauer 550 Series, and far superior to any standard AR-15 type trigger I have used.

I shot the heavy barrel precision Massoud rifle prone off the bipod at 100 yards and had no trouble putting five rounds of Black Hills .308 Match into an inch using a Nightforce 5.5-22x50mm scope and LaRue Uni-Mount, but the rifle does even better from the bench, producing 5-shot groups of well under 1-MOA. The precision long range Massoud was equipped with a Gemtech Sandstorm 7.62mm caliber titanium suppressor and the carbine was tested with an AAC suppressor.

Both standard length Massoud’s were shot informally offhand using an Aimpoint CompM3 Red Dot Sight and I was surprised at how controllable they were on rapid fire, as well as the fact that that they seemed to recoil only a little more than a .223.

Final Notes On The Magpul Massoud

While the Massoud is essentially a 7.62x51mm rifle, as with all others of the breed, it could be had in virtually any caliber using a case based on the .308. These would include the .22-250, .243, 6.5mm-08, 7mm-08, .338 Federal and more, but here’s the frosting on this caliber cake. Any of these caliber changes would require only another barrel in the particular caliber. You can use the same bolt and same magazine, and only a small wrench to make the change.

While Magpul’s new SR-25 type magazine will surely be a huge success, what about the Massoud? The design is certainly high on the list in all categories. When you think about all the millions of dollars spent by big companies in designing and developing so-called “state-of-the-art” rifles, you wonder how such a rifle as the Massoud could come from a relatively small company. I believe it’s the result of a team composed not only of engineers, but also of real end users and “gun guys” thinking outside the box and welcoming input from others. Whether or not the Massoud goes into full production will depend on demand and the political climate, but more than one company has expressed interest.