gtag('set', {'user_id': 'USER_ID'}); // Set the user ID using signed-in user_id.

CROM USA Ruger PC Carbine Chassis

by | Sep 28, 2019 | Ruger PC | 0 comments

CROM USA Ruger PC Carbine Chassis

  1. Home
  2. Ruger PC 9
Picture of CROM USA Ruger PC Carbine Chassis

CROM USA Ruger PC Carbine Chassis

I can’t recall writing a post that brought me as much pleasure as this one. Visitors may or may not know this but this website is a sibling of 308ar.com and it’s forum. My forum right hand man and good friend Rob Sotelo aka “Robocop 1051” had an idea a while back, actually a few ideas. Rob wanted to give shooters some hardware better than anything they had seen previously and he also had ideas for hardware shooters didn’t know they needed. So being the ingenious and motivated entrepreneur he is Rob grabbed the bull by the horns, found some additional smart folks, invested cash and Condition Red Ordnance Manufacturing aka CROM USA was born. That leads to the subject of this post, the CROM USA Ruger PC Carbine Chassis.

Visit CROM USA

CROM USA Ruger PC Carbine Chassis

Designed from the ground up with more features and options than the competition, CROM USA has designed and manufactured the Best Ruger PC Carbine Chassis available today. CROM USA designed their Ruger PC Chassis with 50 state compliance in mind. Combine the chassis construction with some buyer ingenuity and a knowledge of local laws is all that is need to be compliant.

This chassis was designed to be compatible with the Mossberg 500/590 stock options (some fitting may be required). The ability to add a shotgun stock was desirable for many shooters, in particular those behind the lines of restricted states. If the Mossberg options aren’t suitable shooters may utilize any of the various AR stock adapters and outfit the PC Carbine with any of the thousands of stock and pistol grip combinations (know your state/local laws before assembling).

Constructed of lightweight aircraft grade billet aluminum the CROM Ruger PCC chassis should remain compatible with whatever front end you chose (they have their own coming out soon too) CROM also maintained the ability to swap between original Glock and Ruger magazine adapter inserts.

CROM USA Ruger PC Carbine Chassis Features

  1. Finish – Cerakote “Elite” color finish. Much stronger and more durable than anodizing.
  2. Magwell – Flared “tactical” magwell for faster and easier magazine exchanges… Not big enough? The Generation 2 chassis is compatible with some of the aftermarket “competition” magwell designs.
  3. Magazine Release – Extended magazine release for the trigger finger. Drop those mags faster and with less rifle manipulation. Due to the design of the rifle, we couldn’t make it a true “ambi” without completely resigning the rifle… So we made the chassis capable of switching to a left or right handed extended release!***Bonus points! Extending the magwell created the familiar real estate so many of us have enjoyed on AR type platforms. Get that close-up grip without having to grab your stick magazine.
  4. Ergonomics – Relieved contact points that reduce weight and allow more ergonomics to the chassis. The chassis design will feel smaller than the original polymer design,and make for more comfortable shooting for smaller shooters.

***Disclaimer: Pictures shown are of the original prototype, and several cosmetic changes are in place for the new Generation 2 chassis.

This refers to the rear chassis assembly ONLY. The Ruger PC Carbine and all stocks, adapters, grips, handguards, rail risers, etc etc etc. are sold separately. 

Save

Save

RUGER PC 9 19115

by | Sep 24, 2019 | Ruger PC | 0 comments

RUGER PC 9 19115

  1. Home
  2. Ruger PC 9
Picture of RUGER PC 9 19115

RUGER PC CARBINE 9MM RIFLE WITH M-LOK HANDGUARD - 19115

The Ruger PC Carbine has become a favorite amongst shooters with its inexpensive ammunition, plinking and varmint management capabilities. This edition of the fan favorite features some added features on the trusted platforms. This version of the PC Carbine features a CNC-milled handguard that is Type III hard-coat anodized aluminum for maximum durability, with Magpul M-LOK accessory attachment slots on all four sides for easy mounting of M-LOK-compatible rails and accessories. Interchangeable magazine wells allow for use of common Ruger and Glock magazines. The firearms ship with SR-Series/Security-9 pistol magazine well installed and an additional magazine well accepting Glock magazines is included. Available at Palmetto State Armory and Brownells

Visit Ruger

RUGER PC 9 19115

  • CNC-milled handguard that is Type III hard-coat anodized aluminum for maximum durability, with Magpul® M-LOK® accessory attachment slots on all four sides for easy mounting of M-LOK-compatible rails and accessories.
  • Interchangeable magazine wells for use of common Ruger® and Glock® magazines. Ships with SR-Series™/Security-9® pistol magazine well installed and an additional magazine well accepting Glock® magazines is included*. Ruger American® Pistol magazine wells are available at ShopRuger.com.
  • Easy takedown enables quick separation of the barrel/forend assembly from the action for ease of transportation and storage. Takedown is as simple as locking the bolt back and verifying that the rifle is unloaded, pushing a recessed lever, twisting the subassemblies and pulling them apart.
  • Dead blow action features a custom tungsten dead blow weight that shortens bolt travel and reduces felt recoil and muzzle rise. Bolt is machined from heat treated, chrome-moly steel to ensure strength, structural integrity and durability.
  • Reversible magazine release and reversible charging handle to support ambidextrous use or one-handed control manipulation while maintaining a proper firing grip*.
  • Cold hammer-forged, chrome-moly steel barrel with ultra-precise rifling provides exceptional accuracy and longevity. The heavy contour barrel provides consistent accuracy, while barrel fluting sheds unnecessary weight and allows for quick handling.
  • Threaded barrel with included thread protector allows for use of standard muzzle accessories.
  • Accurate sighting system with adjustable ghost ring rear aperture sight and non-glare, protected blade front sight.
  • Soft rubber buttpad with spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear or defensive gear (three, 1/2″ spacers included).
  • Durable, glass-filled nylon synthetic buttstock features a proprietary texture for enhanced control and an integral sling mount for rapid sling attachment .
  • Light, crisp trigger pull with minimal overtravel and positive reset utilizing proven 10/22® trigger components.
  • CNC-machined from an aerospace-grade 7075-T6 aluminum billet, the receiver includes an integrated Picatinny-style† rail and is Type III hard-coat anodized for maximum durability.
  • Also includes: one, SR-Series™ pistol magazine and hex wrenches for rear sight adjustment, buttpad spacer adjustment and charging handle removal.
 
  • MFR#: 19115
  • UPC: 736676191154
  • SKU: 5165458097
  • Caliber: 9mm
  • Stock: Black Synthetic with Aluminum Free-Float Handguard
  • Front Sight: Protected Blade
  • Rear Sight: Adjustable Ghost Ring
  • Handguard: Magpul M-Lok Compatible, Type III Hard Coat Anodized
  • Frame Material: 7075-T6 Aluminum Alloy
  • Frame Finish: Type III Hardcoat Anodized
  • Length of Pull: 12.62″-14.12″
  • Barrel Feature: Threaded, Fluted
  • Twist: 1:10″ RH
  • Grooves: 6
  • Thread Pattern: 1/2″-28
  • Barrel Length: 16.12″
  • Overall Length: 34.37″
  • Weight: 7 lbs.
  • Magazine: (1) 17 Round Ruger SR Series Security 9 Mag

* Older Glock® magazines that feature only one magazine latch slot may still be used with the PC Carbine™, but the magazine release button must remain on the left side of the rifle as shipped from the factory. The magazine release button should not be reversed when using this type of magazine as the magazine will not properly lock into the magazine well. Early versions of Glock®-brand magazines with a “U” shaped notch at the rear of the magazine feed lips will not function in the PC Carbine™

† NOTE: The receiver-mounted, Picatinny-style rail is designed to accommodate most optics and optic mounts intended for use with Picatinny/ MIL-STD 1913 rails. However, due to reduced clearance between the top of the receiver and the bottom of the optics rail, optics and optic mounts that extend more than .275″ below the top of the rail may not fit the PC Carbine™. Ensure that the optic or optic mount you intend to use does not extend more than .275″ below the top of the Picatinny-style rail when installed.

Save

Save