Complete short-action receiver and bolt assembly give the reliability and smoothness of the classic Remington 700 action combined with innovative features designed specifically for police, military, and civilian precision shooters.
These days Remington does a fine job manufacturing accurate rifles. However there may come a time when the old Remington 700 is not shooting groups as tight as it once did or maybe you just want the best accuracy that can be achieved from your rifle. A replacement barrel is a good investment. Its like getting a new and more accurate gun at half the price. All barrels for a Remington model 700 will be required to be fitted to some degree by a gunsmith. If you choose a barrel such as the Shilen it requires the least amount of work as it is pre threaded with a cut chamber. This means it only needs reamed to the final dimension. Other barrels are purchased as blanks and must be cut to length, threaded and have the chambers cut and reamed for your desired caliber. In many cases the barrel will require some sort of coloring or protective coating as many barrels are sold “in the white”. Note: There are no drop in barrels for a Remington 700. All replacement barrels must be fitted and headspaced by a qualified gunsmith Note: Replace your factory Remington 700 Trigger before you consider a new barrel. Visit the Remington 700 Trigger page for further information.
The Remington 700 SPS Tactical Barreled Action allows gun builders to start with a tried-and-true action and barrel combination, allowing them to add aftermarket stocks, optics and other options to build their ideal rifle. The Remington 700 SPS Tactical Barreled Action includes all of the same features found on the company’s SPS Tactical model, including a threaded barrel with a heavy-profile, perfectly suited for precision shooting.
Clint McKee and Fulton Armory know the M14 and they know it well, in fact they build some of the tightest and most accurate M14 style rifles available. When you purchase a complete Fulton Armory Rifle you are purchasing a rifle handcrafted by very skilled people. These are not mass produced firearms by any measure. FA also has outstanding service and support, they do business the old fashioned way and rely heavily on their reputation. Fulton Armory often gets a slight ding from purists who prefer forged receivers over cast receivers. I’m not sure this matters with today’s modern manufacturing methods but that’s a discussion for another page. Additionally about a decade and a half ago there were complaints about soft bolts. That has long since disappeared but internet posts don’t disappear and keep regurgitating. The M65 Enhanced Sniper Rifle is one version of Fulton Armory’s take on the M14 platform based M21 Sniper Weapon System
The United States Army wanted an accurate sniper rifle during the Vietnam War. The M14 was selected because of its accuracy, reliability, and the ability for a quick follow up shot. As a result, in 1969, the Rock Island Arsenal converted 1,435 National Match (target grade) M14s by adding a Redfield ART Adjustable Ranging Telescope 3–9× and providing National Match grade ammunition (7.62 Lake City Long Range XM-118). This version, called the XM21, had a specially selected walnut stock and was first fielded in the second half of 1969. An improved version with a fiberglass stock was designated the M21 in 1975. The M21 remained the Army’s primary sniper rifle until 1988, when it was replaced by the M24 Sniper Weapon System; some M21s were later re-issued and used in the Iraq War.
The M21 Sniper Weapon System (SWS) is the semi-automatic sniper rifle version of the M14 rifle. It’s chambered for the 7.62×51mm NATO cartridge and 7.62×54mmR for Vietnamese and Chinese modified versions, as well the rare .30-06 version.
The Sage M14ALCS Enhanced Battle Rifle Chassis Stock System is precision CNC machined from a solid billet of high strength aircraft grade aluminum. Fits Mil-Spec M1A/M14 rifles with standard or medium weight barrels. The M14ALCS is a drop-in chassis and features a six position telescoping stock and an adjustable polymer cheek rest with two inches of vertical adjustment. Additionally the chassis includes five Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a removable Kydex forend with a built in palm swell, and a soft one inch recoil pad. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding. Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear-lugged receivers.
I’m old enough to remember Jeff Cooper in the 1980’s and 1990’s passionately writing about the need for a “Scout Rifle” . The Springfield Armory M1A Scout Squad Model Rifle is a departure from his definition in two significant ways. The Springfield Armory M1A Scout Rifle is semi-automatic, Jeff Cooper specified bolt action and the Springfield Armory M1A Scout Rifle weighs in at 8.8 pounds while Jeff Cooper specified the scout rifle weigh less than 6.5 pounds. With that said I think in this day and age Jeff Cooper would have embraced the Springfield Armory Scout Rifle
The ALG AK Trigger is a single stage trigger for the AK47and AK74 variant platform. The AKT is machined from S7 tool steel. The AKT features a smoother and shorter trigger pull than the stock trigger, and is ideal for combat and home defense use. It has a Manganese Phosphated finish and is the same process used on stock AK triggers. The ALG AK Trigger feature a unique trigger bow known as the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger.
CMC AK Elite Bow or Curved Style Trigger, part number 92605 AK drop-in trigger group is the ultimate upgrade for your AK47 variant. With its 100% modular, CNC-machined, and easy to install design, our trigger group will give your AK the cleanest, most reliable trigger pull its ever had. All versions are preset with a factory pull of 3.5/4.5 pounds.
New manufacture FAL SA58 Belgian Type Handguard. Constructed from fiberglass reinforced polymer, with the proper metal hardware already installed. These military style handguards will not warp or flex under excessive heat. Improved design also has reinforcements in the front, center and rear for extra rigidity.